关于我们
您当前的位置 : 首 页 >> 产品中心 >> 江苏机械制造磁粉探伤机

联系我们Contact Us

盐城金格瑞无损检测设备有限公司 

联系人:王经理 

电话0515-82318533 

手机15962040190 

传真0515-82399962 

邮箱jgrndt@163.com 

Q Q1433783111 

地址射阳县合德工业园合德路7号

网址www.jgrts.com 

          www.jgrndt.com

江苏全自动磁粉探伤机

  • 所属分类:江苏机械制造磁粉探伤机

  • 点击次数:
  • 发布日期:2022/03/22
  • 在线询价
详细介绍

全自动磁粉探伤机

Full-automatic magnetic particle flaw detector

磁粉探伤机厂家

全自动磁粉探伤检测流水线是主要为大批量的工件检测而设计的,除人工观察裂纹外,其它动作均自动完成。采用固定流水式,主要由电器控制系统、机械流水线传输系统和输送式远离法退磁系统等组成。电器控制部分集中安装在电源控制柜内,由磁化周向电源系统、纵向磁化电源系统、电气控制系统(包含PLC控制系统)、复合磁化系统、紫外线灯及暗室系统,暗室照明系统构成;机械系统由流水线传输系统(由电机和输送带传输系统),电极夹持系统(气缸和磁化电极)、磁悬液喷洒、过滤及回收系统构成,远离法退磁系统由高场强退磁线圈、减速机电机、输送带传输系统组成。

The full-automatic magnetic particle inspection assembly line is mainly designed for mass inspection of workpieces, and all other actions are automatically completed except manual observation of cracks. Fixed flow type is adopted, which mainly consists of electrical control system, mechanical flow line transmission system and conveying type remote demagnetization system. The electric appliance control part is centrally installed in the power control cabinet and consists of a magnetization circumferential power supply system, a longitudinal magnetization power supply system, an electric control system (including a PLC control system), a composite magnetization system, an ultraviolet lamp, a darkroom system and a darkroom lighting system. The mechanical system consists of assembly line transmission system (composed of motor and conveyor belt transmission system), electrode clamping system (cylinder and magnetized electrode), magnetic suspension spraying, filtering and recovery system. The remote demagnetization system consists of high-field demagnetization coil, reducer motor and conveyor belt transmission system.

一次性复合磁化可检查出工件表面和近表面因锻造、热处理、机械加工和疲劳而引起的裂痕等细微缺陷,磁化喷淋后经过人工观察有无缺陷,设备探伤完毕后,由于批量较大,观察完毕后由输送带退磁,速度快、效率高。

One-time composite magnetization can check out minor defects such as cracks on the surface and near surface of the workpiece caused by forging, heat treatment, mechanical processing and fatigue. After magnetization spraying, manually observe whether there are any defects. After equipment flaw detection is completed, due to large batch size, the conveyor belt demagnetizes after observation, with high speed and efficiency.

相关标签:全自动磁粉探伤机价格,全自动磁粉探伤机厂家,全自动磁粉探伤机供应

最近浏览:

Copyright © 盐城金格瑞无损检测设备有限公司   版权所有  苏ICP备10057796号 专业从事于荧光磁粉探伤机,渗透检测线,磁粉探伤机厂家

技术支持-(4).png